Before you use anything here

This library is not associated with the ACSC, NIST, or any other authority, and nothing in it is accredited, endorsed or approved by one. Control catalogues are mirrored unmodified under their own licences; that is a copy, not an endorsement of anything here.

What a component definition offers is a community-contributed approach to a control, with the instructions and the recipe. Whether it holds in your environment depends on things this library cannot see — what precedes it, what overrides it, what your image resets. Adopting one is your assessment to make, and your authority's to accept.

Each component carries an assurance state its author declared. That is the author's claim, not the library's finding.

Debian 13 ISM Minimum Passphrase Length Component Definition

debian-13-pwquality-minlen · version 1.0.0 · OSCAL 1.1.2

technically-tested published

Documentcomponent-definition.json
sha256 8d05c7c4c03cffa334ff8fbd959fb70c81357b5893fa723d38c0ef946b0769b9
Identityhttps://library.oscalops.net/component-definitions/327f09ef-96c6-54e6-aad8-9d305442ebfe/c15dd086-11e8-45e5-b155-f16b4b68f8a9/1.0.0/component-definition.json
Sourcehttps://github.com/dmblack/oscal_component-definition_debian-passphrase-hardening.git at 85d9681d323d20210966c1a330836b4c2637ea18
VersionsAll versions of debian-13-pwquality-minlen

From the author

Theoretical component. It describes a configuration that satisfies the named controls when applied; it is not an assertion that any particular system is running it. An SSP leveraging this component must supply the implementation evidence for its own hosts.

Assurance state is 'technically-tested': the configuration was applied to a clean Debian 13 install and verified end to end.

Declared by this document

What the contributor says this component applies to and touches. These are the contributor's own statements in their own vocabulary, not the library's, and the library does not check them beyond what OSCAL requires of a property.

PropertyValueVocabulary
os-codenametrixiehttps://ns.oscalops.net/component-definitions
os-distributiondebianhttps://ns.oscalops.net/component-definitions
os-release13https://ns.oscalops.net/component-definitions
publisherlibrary_component-definition contributorshttps://ns.oscalops.net/component-definitions
settingpwquality:minlenhttps://ns.oscalops.net/component-definitions

Debian 13 ISM Minimum Passphrase Length

The ISM minimum password length for the system's applicability, enforced by pam_pwquality: 15 characters on non-classified, OFFICIAL: Sensitive and PROTECTED systems, 17 on SECRET and 20 on TOP SECRET. One drop-in per applicability, exactly one live at a time.

Depends on debian-13-pwquality-base. Pair it with debian-13-pwquality-no-complexity as well: with character-class credits enabled, a shorter password can satisfy the minimum, which the verification script tests for.

Purpose. Enforce the ISM minimum password length on local Debian accounts.

Properties
os-distributiondebian
os-release13
os-codenametrixie
settingpwquality:minlen

Australian Cyber Security Centre: Information Security Manual v2026.09.4

The ISM minimum password length, by applicability, as published in the ACSC ISM OSCAL catalogue release v2026.09.4.

ISM-0421 — Password strength

pam_pwquality enforces a minimum passphrase length of 15 characters on non-classified, OFFICIAL: Sensitive and PROTECTED systems, via the drop-in 50-ism-minlen-nc-os-p.conf.

Verified by behaviour: the shortest passphrase the live policy accepts is measured, and nothing shorter than 15 characters is accepted. A 14-character candidate using every character class is also rejected, which shows credits are not lowering the minimum.

Remarks

ISM applicability for this control is limited to the codes in its applicability props, which match the pinned catalogue. Deploying the drop-in for a different tier would assert a different control (ism-0421, ism-1557, or ism-0422); the apply script removes every other ISM drop-in so two minimum lengths can never be live at once.

Configuration and scripts

ISM-1557 — Password strength

pam_pwquality enforces a minimum passphrase length of 17 characters on SECRET systems, via the drop-in 50-ism-minlen-s.conf.

Verified by behaviour on a SECRET-tier system: nothing shorter than 17 characters is accepted.

Remarks

ISM applicability for this control is limited to the codes in its applicability props, which match the pinned catalogue. Deploying the drop-in for a different tier would assert a different control (ism-0421, ism-1557, or ism-0422); the apply script removes every other ISM drop-in so two minimum lengths can never be live at once.

Configuration and scripts

ISM-0422 — Password strength

pam_pwquality enforces a minimum passphrase length of 20 characters on TOP SECRET systems, via the drop-in 50-ism-minlen-ts.conf.

Verified by behaviour on a TOP SECRET-tier system: nothing shorter than 20 characters is accepted.

Remarks

ISM applicability for this control is limited to the codes in its applicability props, which match the pinned catalogue. Deploying the drop-in for a different tier would assert a different control (ism-0421, ism-1557, or ism-0422); the apply script removes every other ISM drop-in so two minimum lengths can never be live at once.

Configuration and scripts

Files

ResourceFileSHA-256
Minimum length, applicability NC, OS, Pconfig/pwquality.conf.d/50-ism-minlen-nc-os-p.conf3df2c1183d63fdcd66bc739d410cebfa8929bfc926bc3a21d908478dd9d76bf8
Minimum length, applicability Sconfig/pwquality.conf.d/50-ism-minlen-s.confaf3bf12f39953df4e9fcf93c1914bac88d002ff5f16153ab49549fe1baf6fd2c
Minimum length, applicability TSconfig/pwquality.conf.d/50-ism-minlen-ts.conf45ee91bcb5d114c18f4b302cc8449060fb159af88c0c1ab532b456858f39ff66
Apply scriptscripts/apply-minlen.shb4aae00512e58c1b53be6764f24ca50bc501ff67ffcc95e31980015be5e4dd61
Verification scriptscripts/verify-minlen.sh010aa56c327cc1e28d05a0acf4ba8c47f6fdfdb2784b301a33edad87f1497fd8

External references